Recent information

NEWS SHOW

Dear users, welcome to read the latest news of our company. In this report, we will introduce you the latest information about our company.

Contact +

Safety operation and job requirements for wire drawing machines


Release time:

2023-07-10

1. The operator of the wire drawing machine must hold the qualification certificate for the operation of the wire drawing machine, and it is strictly forbidden for unlicensed personnel to operate on the machine.
 
2. The operator of the wire drawing machine must carry out productive processing operations on the designated equipment, and non-personnel at the same level are strictly prohibited from operating the machine or performing serial operations.
 
3. The operator must be familiar with the basic technical parameters and performance indicators of the equipment.
 
4. Operators must be devoted to their duties, be conscientious and responsible, and be proficient in the operation, maintenance and maintenance of this equipment
 
5. Operators must continue to summarize and learn, so as to continuously improve their own quality.
 
Safe operation of wire drawing machine:
 
1. The operator must wear gloves to prevent the workpiece from burning fingers and affecting product quality.
 
2. Before starting the machine, carefully check the air supply (5kg/cm2) of the equipment, whether there is air leakage in the air supply pipeline, and drain the accumulated water in the air filter.
 
3. Correctly install the drawing abrasive belt (the direction of the arrow inside the drawing abrasive belt should be consistent with the direction of the arrow on the drawing roller). Carefully check whether the upper and lower bearing seats and the lifting screw are well lubricated, and make sure that there is no one in front of the discharge material before starting the machine.
Back →